How do I fix a dripping bathtub faucet? - fix bathtub faucet
I do not know which brand is the key .. . Can not find a name brand on them
When the handle very hard, but I have a lot of strength in the vicinity
Thursday, January 7, 2010
Fix Bathtub Faucet How Do I Fix A Dripping Bathtub Faucet?
7 comments:
It seems that the washer went wrong places /. Turn off the water, remove the appropriate master valve (s) with a ball joint. Make saving a mother to her local hardware store if you are not all that count with plumbing. Or take a mother to a plumbing supply company and having someone with real experience of the tracks that have adopted you.
Replace the old hard drive with the new. You can also try a lubricant the first time, you never know what might work. Good luck anyway.
its not hard to disable, the water and start participating ... Then screw the handle back to a rubber washer to solve and a DIY superstore and a new one should get a few, is now the world can make
I did it once or twice a week, not at the hotel I work. Open it, and cut off the water. It should screw a piece of about 2 cm inside the key will be preserved. After removal of the section with the caps and rubber springs. Remove the cap and remove the sources and spread open a little, maybe 1 / 8 ". The process of reverse everything was put in and it should be okay.
Its interface is easy to fix, simply set last week and I am opposed to the mines for older women. First .. the leak (hot or cold) to determine its usually not both. Remove the handle, the mine used to solve a wrench and remove the base, pop up the trunk, put a small piece of rubber, which is new to a small spring. Press firmly until it "seats" and replace the base and the handle and must stop losing. And do not forget to turn off the water in the sink ...
Simply go to the hardware store to get Lowe's and Home Depot to choose a new one for about $ 30. Each is a rite Standard Fit size.it on the former site of a job well done
Try replacing the disk.
Post a Comment